Latest Professional-Cloud-Network-Engineer Material | Professional-Cloud-Network-Engineer Exam Vce Format

2025 Latest BraindumpsVCE Professional-Cloud-Network-Engineer PDF Dumps and Professional-Cloud-Network-Engineer Exam Engine Free Share: https://drive.google.com/open?id=1E7h-Rytz2U_LzJhiPKXW2OO1C_Q0NmK2

Our product is of high quality and boosts high passing rate and hit rate. Our passing rate is 98%-100% and our Professional-Cloud-Network-Engineer test prep can guarantee that you can pass the exam easily and successfully. Our Professional-Cloud-Network-Engineer exam materials are highly efficient and useful and can help you pass the exam in a short time and save your time and energy. It is worthy for you to buy our Professional-Cloud-Network-Engineer Quiz torrent and you can trust our product. You needn’t worry that our product can’t help you pass the exam and waste your money. We guarantee to you our Professional-Cloud-Network-Engineer exam materials can help you and you will have an extremely high possibility to pass the exam.

It is impossible to overstate the significance of valid Professional-Cloud-Network-Engineer exam questions. The latest and actual Professional-Cloud-Network-Engineer exam questions are essential to clear the Professional-Cloud-Network-Engineer exam in one go. Applicants are better prepared to succeed when they prepare with the updated Google Professional-Cloud-Network-Engineer Questions. These Professional-Cloud-Network-Engineer exam questions give applicants the knowledge they need to quickly ace the Professional-Cloud-Network-Engineer examination.

>> Latest Professional-Cloud-Network-Engineer Material <<

Google Cloud Certified - Professional Cloud Network Engineer Test Questions and Answers are Easy to Understand - BraindumpsVCE

The life which own the courage to pursue is wonderful life. Someday when you're sitting in a rocking chair to recall your past, and then with smile in your face. Then your life is successful. Do you want to be successful in life? Then use BraindumpsVCE's Google Professional-Cloud-Network-Engineer Exam Training materials quickly. This material including questions and answers and every IT certification candidates is very applicable. The success rate can reach up to 100%. Why not action? Quickly to buy it please.

Optimize Network Resources

Optimize for Efficiency and Cost: This part measures the individuals’ skills in automation, bandwidth utilization, cost optimization, and VPN versus interconnect.
Optimize Traffic Flow: This subject area requires an understanding of load balancer & CDN location, accommodating workload improvements, regional versus global dynamic routing, and expanding the subnet CIDR ranges within service;

Google Cloud Certified - Professional Cloud Network Engineer Sample Questions (Q36-Q41):

NEW QUESTION # 36
You are designing the architecture for your organization so that clients can connect to certain Google APIs. Your plan must include a way to connect to Cloud Storage and BigQuery. You also need to ensure the traffic does not traverse the internet. You want your solution to be cloud-first and require the least amount of configuration steps. What should you do?

A. Configure Private Google Access on the subnet resource. Create a default route to the internet.
B. Configure Private Google Access on the VPC resource. Create a default route to the internet.
C. Configure Cloud NAT and remove the default route to the internet.
D. Configure a global Secure Web Proxy and remove the default route to the internet.

Answer: A

Explanation:
Enabling Private Google Access on the subnet allows VMs to access Google APIs (like Cloud Storage and BigQuery) directly, without routing traffic over the internet. This approach is cloud-native and involves minimal setup, aligning with a cloud-first strategy.

NEW QUESTION # 37
Your organization has a hub and spoke architecture with VPC Network Peering, and hybrid connectivity is centralized at the hub. The Cloud Router in the hub VPC is advertising subnet routes, but the on-premises router does not appear to be receiving any subnet routes from the VPC spokes. You need to resolve this issue.
What should you do?

A. Create custom learned routes at the Cloud Router in the hub to advertise the subnets of the VPC spokes.
B. Create custom routes at the Cloud Router in the hub to advertise the subnets of the VPC spokes.
C. Create custom routes at the Cloud Router in the spokes to advertise the subnets of the VPC spokes.
D. Create a BGP route policy at the Cloud Router, and ensure the subnets of the VPC spokes are being announced towards the on-premises environment.

Answer: D

Explanation:
Explanation: Creating a BGP route policy at the Cloud Router ensures that the subnets of the VPC spokes are properly advertised to the on-premises environment. This allows the on-premises router to receive and use those routes. Without the correct BGP policies, route advertisement may not happen as expected.

NEW QUESTION # 38
You have the following Shared VPC design VPC Flow Logs is configured for Subnet-1 In the host VPC. You also want to monitor flow logs for Subnet-2. What should you do?

A. Configure a firewall rule to permit Subnet-2 IP addresses outbound in the host protect VPC.
B. Configure a VPC Flow Logs filter for Subnet-2 in the host project VPC.
C. Configure VPC Flow Logs in the service project VPC for Subnet-2.
D. Configure Packet Mirroring in both the host and service project VPCs.

Answer: C

Explanation:
Understanding VPC Flow Logs:
VPC Flow Logs is a feature that captures information about the IP traffic going to and from network interfaces in a VPC. It helps in monitoring and analyzing network traffic, ensuring security, and optimizing network performance.
Current Configuration:
According to the diagram, VPC Flow Logs is already configured for Subnet-1 in the host VPC. This means that traffic information for Subnet-1 is being captured and logged.
Requirement for Subnet-2:
The goal is to monitor flow logs for Subnet-2, which is in the service project VPC.
Correct Configuration for Subnet-2:
To monitor the flow logs for Subnet-2, you need to configure VPC Flow Logs within the service project VPC where Subnet-2 resides. This is because VPC Flow Logs must be configured in the same project and VPC where the subnet is located.
Implementation Steps:
Go to the Google Cloud Console.
Navigate to the service project where Subnet-2 is located.
Select the VPC network containing Subnet-2.
Enable VPC Flow Logs for Subnet-2 by editing the subnet settings and enabling the flow logs option.
Cost and Performance Considerations:
Enabling VPC Flow Logs may incur additional costs based on the volume of data logged. Ensure to review and understand the pricing implications.
Analyze and manage the data collected to avoid unnecessary logging and costs.
Reference:
Google Cloud VPC Flow Logs Documentation
Configuring VPC Flow Logs
Shared VPC Overview
By configuring VPC Flow Logs in the service project VPC for Subnet-2, you ensure that traffic data is correctly captured and monitored, adhering to Google Cloud's best practices.

NEW QUESTION # 39
You are using the gcloud command line tool to create a new custom role in a project by coping a predefined role. You receive this error message:
INVALID_ARGUMENT: Permission resourcemanager.projects.list is not valid What should you do?

A. Remove the resourcemanager.projects.list permission, and try again.
B. Add the resourcemanager.projects.setIamPolicy permission, and try again.
C. Add the resourcemanager.projects.get permission, and try again.
D. Try again with a different role with a new name but the same permissions.

Answer: A

NEW QUESTION # 40
Your software team is developing an on-premises web application that requires direct connectivity to Compute Engine Instances in GCP using the RFC 1918 address space. You want to choose a connectivity solution from your on-premises environment to GCP, given these specifications:
* Your ISP is a Google Partner Interconnect provider.
* Your on-premises VPN device's internet uplink and downlink speeds are 10 Gbps.
* A test VPN connection between your on-premises gateway and GCP is performing at a maximum speed of 500 Mbps due to packet losses.
* Most of the data transfer will be from GCP to the on-premises environment.
* The application can burst up to 1.5 Gbps during peak transfers over the Interconnect.
* Cost and the complexity of the solution should be minimal.
How should you provision the connectivity solution?

A. Use network compression over your VPN to increase the amount of data you can send over your VPN.
B. Provision a Partner Interconnect through your ISP.
C. Provision a Dedicated Interconnect instead of a VPN.
D. Create multiple VPN tunnels to account for the packet losses, and increase bandwidth using ECMP.

Answer: D

NEW QUESTION # 41
......

You can take the Google Cloud Certified - Professional Cloud Network Engineer Professional-Cloud-Network-Engineer practice exam many times to analyze and overcome your weaknesses before the final Google Cloud Certified - Professional Cloud Network Engineer Professional-Cloud-Network-Engineer exam. You will also improve your time management abilities by learning Google Cloud Certified - Professional Cloud Network Engineer in BraindumpsVCE. Professional-Cloud-Network-Engineer Practice Test software 365 days updated and reliable. You will not face any problems in the final Professional-Cloud-Network-Engineer exam.

Professional-Cloud-Network-Engineer Exam Vce Format: https://www.braindumpsvce.com/Professional-Cloud-Network-Engineer_exam-dumps-torrent.html

DOWNLOAD the newest BraindumpsVCE Professional-Cloud-Network-Engineer PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1E7h-Rytz2U_LzJhiPKXW2OO1C_Q0NmK2